Cheng, Li, Dimitriou, Pavlos, Wang, William, Peng, Jun and Aitouche, Abdel (2018) A novel fuzzy logic variable geometry turbocharger and exhaust gas recirculation control scheme for optimizing the performance and emissions of a diesel engine. International Journal of Engine Research. ISSN 1468-0874
![]() |
PDF
- Accepted Version
Available under License All Rights Reserved. Download (1MB) |
Abstract
Variable geometry turbocharger and exhaust gas recirculation valves are widely installed on diesel engines to allow optimized control of intake air mass flow and exhaust gas recirculation ratio. The positions of variable geometry turbocharger vanes and exhaust gas recirculation valve are predominantly regulated by dual-loop proportional–integral–derivative controllers to achieve predefined set-points of intake air pressure and exhaust gas recirculation mass flow. The set-points are determined by extensive mapping of the intake air pressure and exhaust gas recirculation mass flow against various engine speeds and loads concerning engine performance and emissions. However, due to the inherent nonlinearities of diesel engines and the strong interferences between variable geometry turbocharger and exhaust gas recirculation, an extensive map of gains for the P, I, and D terms of the proportional–integral–derivative controllers is required to achieve desired control performance. The present simulation study proposes a novel fuzzy logic control scheme to determine appropriate positions of variable geometry turbocharger vanes and exhaust gas recirculation valve in real-time. Once determined, the actual positions of the vanes and valve are regulated by two local proportional–integral–derivative controllers. The fuzzy logic control rules are derived based on an understanding of the interactions among the variable geometry turbocharger, exhaust gas recirculation, and diesel engine. The results obtained from an experimentally validated one-dimensional transient diesel engine model showed that the proposed fuzzy logic control scheme is capable of efficiently optimizing variable geometry turbocharger and exhaust gas recirculation positions under transient engine operating conditions in real-time. Compared to the baseline proportional–integral–derivative controllers approach, both engine’s efficiency and total turbo efficiency have been improved by the proposed fuzzy logic control scheme while NOx and soot emissions have been significantly reduced by 34% and 82%, respectively.
Item Type: | Article |
---|---|
Keywords: | Exhaust gas recirculation, variable geometry turbocharger, fuzzy logic control, diesel engine |
Schools and Departments: | School of Engineering and Informatics > Engineering and Design |
Research Centres and Groups: | Dynamics, Control and Vehicle Research Group |
Subjects: | T Technology > TJ Mechanical engineering and machinery > TJ0212 Control engineering systems. Automatic machinery (General) T Technology > TJ Mechanical engineering and machinery > TJ0751 Miscellaneous motors and engines Including gas, gasoline, diesel engines |
Depositing User: | Li Cheng |
Date Deposited: | 01 Nov 2018 13:50 |
Last Modified: | 01 Nov 2018 13:50 |
URI: | http://srodev.sussex.ac.uk/id/eprint/79834 |
View download statistics for this item
📧 Request an updateProject Name | Sussex Project Number | Funder | Funder Ref |
---|---|---|---|
SCODECE - Smart COntrol and Diagnosis for Economic and Clean Engines.(Interreg 2 Seas) | G0271 | EUROPEAN UNION | 05-025-SCODECE |