Items for Engineering and Design in 2019

Up a level
Export as [feed] Atom [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | D | E | J | L | M | N | Q | S | T | W | Z
Number of items: 36.


Al-Hussaibi, Walid A and Ali, Falah H (2019) Efficient user clustering, receive antenna selection, and power allocation algorithms for massive MIMO-NOMA systems. IEEE Access, 7. pp. 31865-31882. ISSN 2169-3536

Al-Hussaibi, Walid A and Ali, Falah H (2019) Group layer MU-MIMO for 5G wireless systems. Telecommunication Systems. pp. 1-16. ISSN 1018-4864

Arjunan, Arun, Praveen, Ayyappan S, Olabi, Abdul G and Wang, Chang J (2019) Acoustic performance of metallic foams. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-16. ISBN 9780128035818

Aviles-Espinosa, R, Dore, H, Williams, T and Rendon Morales, E (2019) Quantification of aortic valvuloplasty catheter size using a metrology system based on brightfield microscopy. In: Focus on Microscopy Conference 2019, 14 - 17th April 2019, London. (Accepted)

Aviles-Espinosa, Rodrigo, Rendon Morales, Elizabeth, Luo, Zhenhua, Dore, Henry, Anton, Oana, Rabe, Heike and Prance, Robert J (2019) Neo-SENSE: a non-invasive smart sensing mattress for cardiac monitoring of babies. 2019 IEEE Sensors Applications Symposium, Sophia Antipolis, France, 11-13 March 2019. Published in: 2019 IEEE Sensors Applications Symposium. Institute of Electrical and Electronics Engineers (Accepted)


Dai, Xiaokun, Song, Yang and Yang, Taicheng (2019) Modelling and region stability analysis of wind turbines with battery energy storage system based on switched system with multi-equilibriums. Transactions of the Institute of Measurement and Control, 41 (6). pp. 1519-1527. ISSN 0142-3312


Eze, Ethelbert Chinedu and Chatwin, Chris R (2019) Enhanced recurrent neural network for short-term wind farm power output prediction. IJRDO - Journal of Applied Science, 5 (2). pp. 28-35. ISSN 2455-6653


Jiang, Hanying, Liang, Kun and Li, Zhaohua (2019) Characteristics of a novel moving magnet linear motor for linear compressor. Mechanical Systems and Signal Processing, 121. pp. 828-840. ISSN 0888-3270

Johnson, Chris, Philippides, Andrew and Husbands, Philip (2019) Simulating soft-bodied swimmers with particle-based physics. Soft Robotics. ISSN 2169-5180


Lawal, Lasisi S and Chatwin, Chris R (2019) A review of global navigation satellite and augmentation systems. IJRDO - Journal Of Electrical And Electronics Engineering, 5 (3). pp. 1-21. ISSN 2456-6055

Lawal, Lasisi Salami and Chatwin, Chris Reginald (2019) Design of a low-cost augmentation navigation system: the United Kingdom's immediate answer to the Galileo Brexit conundrum. IJRDO - Journal of Electrical And Electronics Engineering, 5 (1). pp. 1-25. ISSN 2456-6055

Li, Y, Carboni, G, Gonzalez, F, Campolo, D and Burdet, E (2019) Differential game theory for versatile physical human-robot interaction. Nature Machine Intelligence, 1. pp. 36-43. ISSN 2522-5839

Li, Zhaohua, Liang, Kun and Jiang, Hanying (2019) Experimental study of R1234yf as a drop-in replacement for R134a in an oil-free refrigeration system. Applied Thermal Engineering. ISSN 1359-4311

Liang, Huixin, Yang, Youwen, Xie, Deqiao, Li, Lan, Mao, Ning, Wang, ChangJiang, Tian, Zongjun, Jiang, Qing and Shen, Lida (2019) Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility. Journal of Materials Science & Technology. ISSN 1005-0302

Liang, Kun, Li, Zhaohua, Chen, Ming and Jiang, Hanying (2019) Comparisons between heat pipe, thermoelectric system, and vapour compression refrigeration system for electronics cooling. Applied Thermal Engineering, 146. pp. 260-267. ISSN 1359-4311

Light, Ann (2019) Design and social innovation at the margins: finding and making cultures of plurality. Design and Culture. ISSN 1754-7075

Liu, Zibo, Liang, Huixin, Shi, Tianshu, Xie, Deqiao, Chen, Ruoyu, Han, Xiao, Shen, Lida, Wang, Changjiang and Tian, Zongjun (2019) Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility. Ceramics International, 45 (8). pp. 11079-11086. ISSN 0272-8842

Lv, Fei, Shen, Lida, Liang, Huixin, Xie, Deqiao, Wang, Changjiang and Tian, Zongjun (2019) Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment. Optik, 179. pp. 8-18. ISSN 0030-4026


Meng, Zhongwei, Liang, Kun and Fang, Jia (2019) Laminar burning velocities of iso-octane, toluene, 1-hexene, ethanol and their quaternary blends at elevated temperatures and pressures. Fuel, 237. pp. 630-636. ISSN 0016-2361


Nekovee, Maziar and Pinto, Jonathan (2019) Modelling the impact of organizationan structure and whistle blowers on intra-organizational corruption contagion. Physica A: Statistical Mechanics and its Applications, 522. pp. 339-349. ISSN 0378-4371

Nsabwa Kigezi, Tom (2019) Stability, control, and state estimation of free-piston engine generators. Doctoral thesis (PhD), University of Sussex.


Qu, Haibo, Hu, Jialei, Song, Yang and Yang, Tai (2019) Mean square stabilization of discrete-time switching Markov jump linear systems. Optimal Control, Applications and Methods, 40 (1). pp. 141-151. ISSN 0143-2087


Sam, Kin Meng and Chatwin, Chris (2019) Understanding Wechat users' motivations, attitudes and intention of reading promotional material. Journal of Information Technology Management, 30 (1). pp. 25-37. ISSN 1042-1319

Sharma, Sachin and Nekovee, Maziar (2019) A demonstration of automatic configuration of OpenFlow in wireless ad hoc networks. IEEE International Conference on Computer Communications 2019, Paris, France, 29 April - 2 May 2019. Published in: International Conference on Computer Communication and Networks (ICCCN). Institute of Electrical and Electronics Engineers (Accepted)

Sheng, Zhengguo, Pfersich, Saskia, Eldridge, Alice, Zhou, Jianshan, Tian, Daxin and Leung, Victor C M (2019) Wireless acoustic sensor networks and edge computing for rapid acoustic monitoring. IEEE CAA Journal of Automatica Sinica, 6 (1). pp. 64-74. ISSN 2329-9266


Tan, Deck Khong, Nokhodchi, Ali and Maniruzzaman, Mohammed (2019) 3D and 4D printing technologies: innovative process engineering and smart additive manufacturing. In: Maniruzzaman, Mohammed (ed.) 3D and 4D Printing in Biomedical Applications. Wiley, pp. 25-52. ISBN 9783527344437

Tan, Yuanqiu, Zang, Chaoping and Petrov, E P (2019) Analysis of sensitivity and optimization for mistuned bladed disk forced response using high-fidelity models. Mechanical Systems and Signal Processing, 124 (1). pp. 502-523. ISSN 0888-3270

Tian, Daxin, Zhou, Jianshan, Wang, Yunpeng, Sheng, Zhengguo, Duan, Xuting and Leung, Victor C M (2019) Channel access optimization with adaptive congestion pricing for cognitive vehicular networks: an evolutionary game approach. IEEE Transactions on Mobile Computing. ISSN 1536-1233

Tian, Daxin, Zhu, Yukai, Duan, Xuting, Hu, Junjie, Sheng, Zhengguo, Chen, Min, Wang, Jian and Wang, Yunpeng (2019) An effective fuel level data cleaning and repairing method for vehicle monitor platform. IEEE Transactions on Industrial Informatics, 15 (1). pp. 410-416. ISSN 1551-3203


Wang, Chang Jiang and Hazlehurst, Kevin B (2019) Orthopaedic implant design and analysis: potential of 3D/4D bioprinting. In: Maniruzzaman, Mohammed (ed.) 3D and 4D printing in biomedical applications: process engineering and additive manufacturing. Wiley-VCH, pp. 423-442. ISBN 9783527344437

Wang, Lin, Gjoreski, Hristijan, Ciliberto, Mathias, Mekki, Sami, Valentin, Stefan and Roggen, Daniel (2019) Enabling reproducible research in sensor-based transportation mode recognition with the Sussex-Huawei dataset. IEEE Access. ISSN 2169-3536

Wang, Lin and Roggen, Daniel (2019) Sound-based transportation mode recognition with smartphones. In: IEEE ICASSP 2019: Spatial Audio Recording and Detection and Classification of Acoustic Scenes and Events, 12 -17 May 2019, Brighton, U.K.. (Accepted)

Wang, Xiao, Xu, Mingyang, Wang, Zhanwen, Shen, Lida, Qiu, Mingbo, Tian, Zongjun, Ahsan, Muhammad Naveed and Wang, Changjiang (2019) Properties of jet-plated Ni coating on Ti alloy (Ti6Al4V) with laser cleaning pretreatment. Metals, 9 (2). 248 1-12. ISSN 2075-4701


Zhao, S, Butera, S, Lioliou, G, Krysa, A B and Barnett, A M (2019) AlInP photodiode X-ray detectors. Journal of Physics D: Applied Physics, 52 (22). pp. 1-9. ISSN 0022-3727

Zhou, Jianshan, Tian, Daxin, Wang, Yunpeng, Sheng, Zhengguo, Duan, Xuting and Leung, Victor C M (2019) Reliability-optimal cooperative communication and computing in connected vehicle systems. IEEE Transactions on Mobile Computing. ISSN 1536-1233

Zhu, Zhennan, Liang, Kun, Zeng, Dongjian, Meng, Zhongwei, Zuo, Zinong and Pei, Yiqiang (2019) Laminar flame characteristics of natural gas and dissociated methanol mixtures diluted by nitrogen. Journal of the Energy Institute. ISSN 1743-9671

This list was generated on Tue Jan 25 07:53:59 2022 GMT.