Article

Ahn, K K and Nguyen, B K (2007) Optimal proportional-integral-derivative control of shape memory alloy actuators using genetic algorithm and the Preisach model. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 531-540. ISSN 0959-6518

Ahn, Kyoung Kwan and Nguyen, Bao Kha (2006) Improvement of the performance of hysteresis compensation in SMA actuators by using inverse Preisach model in closed — loop control system. Journal of Mechanical Science and Technology, 20 (5). pp. 634-642. ISSN 1738-494X

Ahn, Kyoung Kwan and Nguyen, Bao Kha (2007) Internal model control for shape memory alloy actuators using fuzzy based Preisach model. Sensors and Actuators A: Physical, 136 (2). pp. 730-741. ISSN 0924-4247

Ahn, Kyoung Kwan and Nguyen, Bao Kha (2008) Modeling and control of shape memory alloy actuators using Preisach model, genetic algorithm and fuzzy logic. Mechatronics, 18 (3). pp. 141-152. ISSN 0957-4158

Ahn, Kyoung Kwan and Nguyen, Bao Kha (2006) Position control of shape memory alloy actuators using self tuning fuzzy PID controller. International Journal of Control Automation and Systems, 4 (6). pp. 756-762. ISSN 1598-6446

Al Qubeissi, Mansour A (2012) Developing a conjugate heat transfer solver. World Academy of Science, Engineering and Technology, 67. pp. 421-426. ISSN 2010-3778

Al Roqi, Abdurrhman A and Wang, Weiji (2014) Torque of rotating device prior an airlane landing. International Journal of Engineering Research and General Science, 2 (2). pp. 214-222. ISSN 2091-2730

Aldair, A A and Wang, W J (2012) A neurofuzzy controller for full vehicle active suspension systems. Journal of Vibration and Control, 18 (12). pp. 1837-1854. ISSN 1077-5463

Chen, Guoqiang and Dunne, J F (2016) A fast continuation scheme for accurate tracing of nonlinear oscillator frequency response functions. Journal of Sound and Vibration, 385. pp. 284-299. ISSN 0022-460X

Chen, Junjie, Zang, Chaoping, Zhou, Biao and Petrov, EP (2018) A study of friction micro-slip modelling for dynamic analysis of bladed discs with root joints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2017) Investigation of waste heat recovery system at supercritical conditions with vehicle drive cycles. Journal of Mechanical Science and Technology, 31 (2). pp. 932-936. ISSN 1738-494X

Chowdhury, Jahedul Islam, Nguyen, Bao Kha, Thornhill, David, Hu, Yukun, Soulatiantork, Payam, Balta-Ozkan, Nazmiye and Varga, Liz (2018) Fuzzy nonlinear dynamic evaporator model in supercritical organic rankine cycle waste heat recovery systems. Energies, 11 (4). pp. 1-24. ISSN 1996-1073

Dunne, J F and Ponce Cuspinera, L A (2015) Optimal gear ratio planning for flywheel-based kinetic energy recovery systems in motor vehicles. Journal of Dynamic Systems, Measurement and Control, 137 (7). 071012. ISSN 0022-0434

Eze, Ethelbert Chinedu and Chatwin, Chris R (2019) Enhanced recurrent neural network for short-term wind farm power output prediction. IJRDO - Journal of Applied Science, 5 (2). pp. 28-35. ISSN 2455-6653

Irps, Thomas John Berend and Kanjirakkad, Vasudevan (2016) On the interaction between turbulence grids and boundary layers. European Physical Journal Web of Conferences, 114. ISSN 2100-014X

Jiang, Zheng, Matamoros-Sanchez, Alejandra Z, Zolotas, Argyrios, Goodall, Roger and Smith, Malcolm (2015) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (3). pp. 315-329. ISSN 0954-4097

Kigezi, Tom Nsabwa and Dunne, Julian (2017) A model-based control design approach for linear free-piston engines. Journal of Dynamic Systems, Measurement and Control, 139 (11). ISSN 0022-0434

Koscso, Adam, Dhondt, Guido and Petrov, Yevgen (2018) High-fidelity sensitivity analysis of modal properties of mistuned bladed disks regarding material anisotropy. Journal of Engineering for Gas Turbines And Power, 141 (2). 021036 1-11. ISSN 0742-4795

Langari, M, Yang, Z, Dunne, J F, Jafari, S, Pirault, J-P, Long, C A and Thalackottore Jose, J T (2018) Multi-phase CFD-conjugate heat transfer for spray cooling in the non-boiling regime. Journal of Computational Multiphase Flows, 10 (1). pp. 33-42. ISSN 1757-482X

Le, Duc Hanh, Nguyen, Bao Kha, Ahn, Kyoung Kwan and Jo, Woo Keun (2009) Trajectory control of electro-hydraulic excavator using fuzzy self tuning algorithm with neural network. Journal of Mechanical Science and Technology, 23 (1). pp. 149-160. ISSN 1738-494X

Liang, Ce, Wang, Chang Jiang, Nguyen, Van Bac, English, Martin and Mynors, Diane (2017) Experimental and numerical study on crashworthiness of cold-formed dimpled steel columns. Thin-Walled Structures, 112. pp. 83-91. ISSN 0263-8231

Liu, Xueqin, Li, Kang, McAfee, Marion, Nguyen, Bao Kha and McNally, Gerald (2012) Dynamic gray-box modeling for on-line monitoring of polymer extrusion viscosity. Polymer Engineering and Science, 52 (6). pp. 1332-1341. ISSN 0032-3888

Mynors, D J, Wang, C J and English, M (2009) Simulating the UltraSTEEL dimpling process. Key Engineering Materials, 410-11. pp. 449-456. ISSN 1013-9826

Nguyen, Bao Kha and Ahn, Kyoung Kwan (2008) Feedforward control of shape memory alloy actuators using fuzzy-based inverse Preisach model. IEEE Transactions on Control Systems Technology, 17 (2). pp. 434-441. ISSN 1063-6536

Nguyen, Trong Tai, Nguyen, Bao Kha and Ahn, Koung Kwan (2010) Predictive position and force control for shape memory alloy cylinders. Journal of Mechanical Science and Technology, 24 (8). pp. 1717-1728. ISSN 1738-494X

Nguyen, V B, Wang, C J, Mynors, D J, Castellucci, M A and English, M A (2013) Finite element simulation on mechanical and structural properties of cold-formed dimpled steel. Thin-Walled Structures, 64. pp. 13-22. ISSN 0263-8231

Nikolic, M, Petrov, E P and Ewins, D J (2007) Coriolis forces in forced response analysis of mistuned bladed disks. Journal of Turbomachinery, 129 (4). pp. 730-739. ISSN 0889-504X

Pei, Yong-Chen and Chatwin, Chris (2012) Elastic connection disk subjected to periodically fluctuating transmitted torque and rotational speed. Journal of Sound and Vibration, 331 (13). pp. 3083-3095. ISSN 0022460X

Petrov, E and Géradin, M (1998) Finite element theory for curved and twisted beams based on exact solutions for three-dimensional solids Part 1: Beam concept and geometrically exact nonlinear formulation. Computer Methods in Applied Mechanics and Engineering, 165 (1-4). pp. 43-92. ISSN 0045-7825

Petrov, E and Géradin, M (1998) Finite element theory for curved and twisted beams based on exact solutions for three-dimensional solids Part 2: Anisotropic and advanced beam models. Computer Methods in Applied Mechanics and Engineering, 165 (1-4). pp. 93-127. ISSN 0045-7825

Petrov, E P (2012) Analysis of flutter-induced limit cycle oscillations in gas-turbine structures with friction, gap, and other nonlinear contact interfaces. Journal of Turbomachinery, 134 (6). 061018/1-061018/13. ISSN 0889-504X

Petrov, E P (2007) Direct parametric analysis of resonance regimes for nonlinear vibrations of bladed disks. Journal of Turbomachinery, 129 (3). pp. 495-502. ISSN 0889-504X

Petrov, E P (2008) Explicit finite element models of friction dampers in forced response analysis of bladed disks. Journal of Engineering for Gas Turbines and Power, 130 (2). ISSN 0742-4795

Petrov, E P (2016) Stability analysis of multiharmonic nonlinear vibrations for large models of gas-turbine engine structures with friction and gaps. Journal of Engineering for Gas Turbines and Power, 139 (2). 022508. ISSN 0742-4795

Petrov, E P (2010) A method for forced response analysis of mistuned bladed disks with aerodynamic effects included. Journal of Engineering for Gas Turbines and Power, 132 (6). 062502. ISSN 0742-4795

Petrov, E P (2018) A method for parametric analysis of stability boundaries for nonlinear periodic vibrations of structures with contact interfaces. Journal of Engineering for Gas Turbines and Power, 141 (3). 031023 1-11. ISSN 0742-4795

Petrov, E P (2004) A method for use of cyclic symmetry properties on analysis of nonlinear multiharmonic vibrations of bladed disks. Journal of Turbomachinery, 126 (1). pp. 175-183. ISSN 0889-504X

Petrov, E P (2008) A sensitivity-based method for direct stochastic analysis of nonlinear forced response for bladed disks with friction interfaces. Journal of Engineering for Gas Turbines and Power, 130 (2). 022503. ISSN 0742-4795

Petrov, E P and Ewins, D J (2007) Advanced modeling of underplatform friction dampers for analysis of bladed disk vibration. Journal of Turbomachinery, 129 (1). pp. 143-150. ISSN 0889-504X

Petrov, E P and Ewins, D J (2003) Analysis of the worst mistuning patterns in bladed disk assemblies. Journal of Turbomachinery, 125 (4). pp. 623-631. ISSN 0889-504X

Petrov, E P and Ewins, D J (2003) Analytical formulation of friction interface elements for analysis of nonlinear multi-harmonic vibrations of bladed disks. Journal of Turbomachinery, 125 (2). pp. 364-371. ISSN 0889-504X

Petrov, E P and Ewins, D J (2006) Effects of damping and varying. contact area at blade-disk joints in forced response analysis of bladed disk assemblies. Journal of Turbomachinery, 128 (2). pp. 403-410. ISSN 0889-504X

Petrov, E P and Ewins, D J (2004) Generic friction models for time-domain vibration analysis of bladed disks. Journal of Turbomachinery, 126 (1). pp. 184-192. ISSN 0889-504X

Petrov, E P and Ewins, D J (2005) Method for analysis of nonlinear multiharmonic vibrations of mistuned bladed disks with scatter of contact interface characteristics. Journal of Turbomachinery, 127 (1). pp. 128-136. ISSN 0889-504X

Petrov, E P and Ewins, D J (2004) State-of-the-art dynamic analysis for non-linear gas turbine structures. Journal of Aerospace Engineering, 218 (G3). pp. 199-211. ISSN 0893-1321

Petrov, E P, Sanliturk, K Y, Ewins, D J and Unset (2002) A new method for dynamic analysis of mistuned bladed disks based on the exact relationship between tuned and mistuned systems. Journal of Engineering for Gas Turbines and Power, 124 (3). pp. 586-597. ISSN 0742-4795

Rajasekharan Nair, Rahul and Petrov, Yevgen (2018) Analysis of deformation of mistuned bladed disks with friction and random crystal anisotropy orientation using gradient-based polynomial chaos expansion. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition: Volume 7C: Structures and Dynamics.

Schwingshackl, C W and Petrov, E P (2012) Modeling of flange joints for the nonlinear dynamic analysis of gas turbine engine casings. Journal of Engineering for Gas Turbines and Power, 134 (12). p. 122504. ISSN 0742-4795

Schwingshackl, C W, Petrov, E P and Ewins, D J (2012) Effects of contact interface parameters on vibration of turbine bladed disks with underplatform dampers. Journal of Engineering for Gas Turbines and Power, 134 (3). 032507. ISSN 0742-4795

Schwingshackl, C W, Petrov, E P and Ewins, D J (2012) Measured and estimated friction interface parameters in a nonlinear dynamic analysis. Mechanical Systems and Signal Processing, 28. pp. 574-584. ISSN 0888-3270

Sever, Ibrahim A, Petrov, Evgeny P and Ewins, David J (2008) Experimental and numerical investigation of rotating bladed disk forced response using underplatform friction dampers. Journal of Engineering for Gas Turbines and Power, 130 (4). 042503. ISSN 0742-4795

Shi, D F, Wang, W J and Qu, L S (2004) Defects detection for bearings: using envelope spectra of wavelet transforms. Journal of Vibration And Acoustics, 126 (1). pp. 567-573. ISSN 1048-9002

Shi, D F, Wang, W J, Unsworth, P J and Qu, L S (2004) Purification and feature extration of shaft orbits for diagnosing large rotating machinery. Journal of Sound and Vibration, 279 (3-5). pp. 581-600. ISSN 0022-460X

Tan, Yuanqiu, Zang, Chaoping and Petrov, E P (2019) Analysis of sensitivity and optimization for mistuned bladed disk forced response using high-fidelity models. Mechanical Systems and Signal Processing, 124 (1). pp. 502-523. ISSN 0888-3270

Tan, Yuanqiu, Zang, Chapoing and Petrov, Yevgen (2018) Identification of crystal orientation for turbine blades with anisotropy materials. Chinese Journal of Aeronautics, 31 (2). pp. 410-418. ISSN 1000-9361

Tang, H, Puttock-Brown, M R and Owen, J M (2018) Buoyancy-induced flow and heat transfer in compressor rotors. Journal of Engineering for Gas Turbines and Power, 140 (7). 071902 1-10. ISSN 0742-4795

Tian, Liang, Wang, William and Peng, Jun (2012) Effects of bearing outer clearance on the dynamic behaviours of the full floating ring bearing supported turbocharger rotor. Mechanical Systems and Signal Processing, 31 (1). pp. 155-175. ISSN 0888-3270

Unal, Efe, Ahn, Hojin and Sorguven, Esra (2016) Experimental investigation on flows in a corrugated channel. Journal of Fluids Engineering, 138 (7). ISSN 0098-2202

Wang, Weiji (2014) Tyre noise reduction using damping layers. Lecture Note Series on Computational and Systems Engineering (LCSE). pp. 27-33.

Yang, Z Y, Priestman, G H and Boysan, H F (1991) Internal Flow Modelling of Vortex Throttles. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 205 (6). pp. 405-413. ISSN 0954-4062

Zang, Chaoping, Tan, Yuanqiu and Petrov, E P (2017) Analysis of forced response for bladed discs mistuned by material anisotropy orientation scatters. Journal of Engineering for Gas Turbines and Power, 140 (2). ISSN 0742-4795

Zheng, G T and Wang, W J (2001) A new cepstral analysis procedure of recovering excitations for recovering excitations for transient components of vibration signals and applications to rotating machinery Condition Monitoring. Journal of Vibration And Acoustics, 123 (2). pp. 222-229. ISSN 1048-9002

Book Section

Al-Qubeissi, Mansour (2012) Proposing a Numerical Solution for the 3D Heat Conduction Equation. In: Modelling Symposium (AMS), 2012 Sixth Asia. IEEE Conference Publications, Washington D.C., pp. 144-149. ISBN 9780769547305

Alajmi, A E, Abdalla, I E, Bengherbia, T and Yang, Z (2014) Numerical simulation of spray combustion of conventional and biofuels. In: Advances in fluid mechanics X. WITpress, UK, pp. 325-335. ISBN 9781845647902

Dianat, M, Yang, Zhiyin and McGuirk, J J (2009) Large-Eddy Simulation of Two-phase Plane Mixing Layer. In: Eckhardt, Bruno (ed.) Advances in Turbulence XII. Springer Proceedings in Physics (132). Springer, pp. 803-806. ISBN 978-3-642-03084-0

Dianat, M, Yang, Zhiyin and McGuirk, J J (2005) Large-eddy Simulation of Scalar Mixing. In: Rodi, W (ed.) Engineering Turbulence Modelling and Experiments 6. Elsevier Science, pp. 823-832. ISBN 9780080445441

Nolfi, Stefano, Bongard, Josh, Husbands, Phil and Floreano, Dario (2016) Evolutionary robotics. In: Siciliano, B and Khatib, O (eds.) Springer handbook of robotics, 2nd Ed. Springer, Cham, pp. 2035-2067. ISBN 9783319325507

Veloudis, I, Yang, Zhiyin, McGuirk, J J and Page, G J (2005) Assessment of the Digital Filter Approach for Generating Large-eddy Simulation Inlet Conditions. In: Rodi, W (ed.) Engineering Turbulence Modelling and Experiments 6. Elsevier Science, pp. 307-316. ISBN 9780080445441

Voke, P R and Yang, Zhiyin (1996) Computational Methods for Large-eddy Simulation in 2D Complex Geometries. In: Deville, M, Gavrilakis, S and Rhyming, I (eds.) Computation of Three-Dimensional Complex Flows. Friedrich Vieweg & Sohn Verlagsgesellschaft mbH, pp. 357-364. ISBN 3528076534

Voke, P R and Yang, Zhiyin (1995) Hybrid Fourier-Multigrid Pressure Solution Method for Navier-Stokes Simulations. In: Morton, K W and Baines, Michael John (eds.) Numerical Methods for Fluid Dynamics V. Oxford University Press, New York, pp. 615-621. ISBN 9780198514800

Voke, P R and Yang, Zhiyin (1999) Large-eddy Simulation of Separation and Transition for Turbomachinery Flows. In: Biringen, Sedat, Örs, Haluk, Tezel, Akin and Ferziger, Joel H (eds.) Industrial and Environmental Application of Direct and Large-eddy Simulation. Springer, pp. 46-63. ISBN 978-3540661719

Yang, Zhiyin (2011) A comparative study of separated boundary layer transition on a flat plate with a blunt/semi-circular leading edge. In: Recent Researches in Mechanics. WSEAS press, pp. 191-195. ISBN 978-1-61804-020-6

Yang, Zhiyin and McGuirk, J J (1999) LES of Rotating Turbulent Pipe Flow with Two Subgrid Scale Models. In: Banerjee, Sanjoy and Eaton, John K (eds.) Turbulence and Shear Flow Phenomena - 1. Begell House, New York, pp. 863-868. ISBN 978-1567001358

Yang, Zhiyin and Voke, P R (1993) Large-eddy Simulation Studies of Bypass Transition. In: Martelli, F and Rodi, W (eds.) Engineering Turbulence Modelling and Experiments (2). Elsevier Science, pp. 603-611. ISBN 978-0444898029

Yang, Zhiyin and Voke, P R (2000) On Early Stage Instability of Separated Boundary Layer Transition. In: Dopazo, Ceśar (ed.) Advances in Turbulence VIII. International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, pp. 145-148. ISBN 84-89925-65-8

Reports and working papers

Yang, Zhiyin and Voke, P R (1991) Numerical simulation of transition under turbulence. Project Report. Surrey Unviersity, Surrey, UK.

Yang, Zhiyin and Voke, P R (1995) Numerical study of separation and transition at a semi-circular leading edge. Project Report. Surrey Unviersity, Surrey, UK.

Conference or Workshop Item

Abdalla, I E and Yang, Zhiyin (2003) Visualization of Large-scale Structures in Separated-reattached Transitional Flow on a Plunt Plate. In: Seventh Triennial International Symposium on Fluid Control, Measurement and Visualization, August 2003, Sorrento, Italy.

Chatwin, Chris (2000) Rapid prototyping and time compression. In: Institution of Mechanical Engineering, 20th September 2000, University of Sussex.

Chatwin, Chris, Corbel, Serge and Young, Rupert (2002) Micro-engineering with lasers. In: Photon02, 2nd - 5th September, 2002, Cardiff International Arena.

Chen, G, Petrov, E and Ewins, D J (2005) Updating of FE models for forced response analysis of mistuned bladed discs in wide frequency ranges. In: ISMA 2004: International Conference on Noise and Vibration Engineering, Sep 20-22, 2004, Louvain, BELGIUM.

Clarke, Alan and Nguyen, Bao Kha (2012) New extrusion processing method for post-consumer recycled polymer using intelligent closed loop control technology. In: Conference on Advanced Materials, Polymer Processing and Manufacturing, 25 September 2012, Belfast, UK.

Huang, S, Petrov, E and Ewins, D J (2006) Comprehensive analysis of periodic regimes of forced vibration for structures with nonlinear snap-through springs. In: 6th International Conference on Modern Practice in Stress and Vibration Analysis, Sep 05-07, 2006, Bath, ENGLAND.

Huang, S, Robb, D A, Ewins, D J and Petrov, E (2006) Dynamic modelling and testing of a representative aeroengine test rig with adjustable nonlinear bearing supports. In: International Conference on Noise and Vibration Engineering (ISMA2006), Sep 18-20, 2006, Louvain, BELGIUM.

Petrov, E and Ewins, D (2002) Models of friction damping with variable normal load for time-domain analysis of vibrations. In: ISMA 2002: International Conference on Noise and Vibration Engineering, Sep 16-18, 2002, Leuven, BELGIUM.

Petrov, E P (2011) Advanced analysis and optimization of nonlinear resonance vibrations in gas-turbine structures with friction and gaps. In: IUTAM Symposium on Emerging Trends in Rotor Dynamics, Mar 23-26, 2009, New Delhi, INDIA.

Petrov, E P (1996) Analysis of periodic regimes of forced, essentially nonlinear vibrations of systems of turbine blades. In: 2nd ECCOMAS Conference on Numerical Methods in Engineering, Sep 09-13, 1996, Paris, FRANCE.

Petrov, E P (2011) Multiparametric analysis of resonance peak vibrations for nonlinear jointed structures. In: ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2011), August 28–31, 2011, Washington, DC, USA.

Petrov, E P (2005) Sensitivity analysis of forced response for nonlinear structures with friction and gaps. In: Structural Dynamics - EURODYN 2005, Sep 04-07, 2005, Paris, FRANCE.

Petrov, E P (2005) Sensitivity analysis of nonlinear forced response for bladed discs with friction contact interfaces. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air (GT2005), Jun 06-09, 2005, Reno, NV, USA.

Petrov, E P (2006) A sensitivity-based method for stochastic and uncertainty analyses of forced response for nonlinear structures with friction and gap interfaces. In: 6th International Conference on Modern Practice in Stress and Vibration Analysis, Sep 05-07, 2006, Bath, ENGLAND.

Petrov, E P and Ewins, D J (2004) Analysis of essentially non-linear vibration of large-scale models for bladed discs with variable contact and friction at root joints. In: 8th International Conference on Vibrations in Rotating Machinery, Sep 07-09, 2004, Swansea, WALES.

Petrov, E P and Ewins, D J (2000) Optimal search for worst mistuning patterns in mistuned bladed discs based on large-scale finite element models. In: Seventh International Conference on Vibrations in Rotating Machinery, Sep 12-14, 2000, Nottingham, England.

Petrov, E P, Vitali, R and Haftka, R T (2000) Optimization of mistuned bladed discs using gradient-based response surface approximations. In: 41st Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics, and Materials Conference and Exhibit, Vol 1 Pts 1-3, Apr 03-06, 2000, Atlanta, GA, USA.

Schwingshackl, C W, Petrov, E P and Ewins, D J (2010) Validation of test rig measurements and prediction tools for friction interface modelling. In: ASME Turbo Expo 2010: Power for Land, Sea, and Air (GT2010), Jun 14-18, 2010, Glasgow, SCOTLAND.

Sladojevic, I, Petrov, E P, Imregun, M and Sayma, A I (2006) Forced response variation of aerodynamically and structurally mistuned turbo-machinery rotors. In: ASME Turbo Expo 2006: Power for Land, Sea, and Air, 8-11th May, 2006, Barcelona, Spain.

Sladojević, I, Petrov, E P, Sayma, A I, Imregun, M and Green, J S (2005) Investigation of the influence of aerodynamic coupling on response levels of mistuned bladed discs with weak structural coupling. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air (GT2005), Jun 06-09, 2005, Reno, NV, USA.

Veloudis, I, Yang, Zhiyin and McGuirk, J J (2007) Development of a New Subgrid Scale (SGS) Model Based on the Energy Spectrum. In: Large-Eddy Simulation for Advanced Design and Combustion Systems, May 2007, Rouen, France.

Voke, P R and Yang, Zhiyin (1993) Numerical Studies of the Mechanisms of Bypass Transition in the Flat Plate Boundary Layer. In: the 9th Symposium on Turbulent Shear Flows, August 1993, Kyoto, Japan.

Wang, C, Yang, Zhiyin and McGuirk, J J (2009) Large-Eddy Simulation of Particle Dispersion in Decaying Isotropic Turbulence. In: 2nd Interactional Conference on Turbulence and Interaction, June 2009, Martinique.

Yang, Zhiyin (2000) Coherent Structures in Separated Boundary Layer Transition. In: the International Conference on Applied Computational Fluid Dynamics, October 2000, Beijing, P.R.China.

Yang, Zhiyin and Abdalla, I E (2008) Visualisation of Coherent Structures in a Separated Boundary Layer Transition with and without Free Stream Turbulence. In: Applied Computing Conference, May 2008, Istanbul, Turkey.

Yang, Zhiyin and Voke, P R (1995) Large-eddy Simulation of Boundary-layer Transition on a Flat Plate with Semi-circular Leading Edge. In: the 10th Symposium on Turbulent Shear Flows, August 1995, Pennsylvania State University, USA.

Yang, Zhiyin and Voke, P R (1998) The Mechanisms of Transition Following Laminar Separation and Reattachment Deduced from Numerical Simulation. In: EUROMECH Colloquium 38/ERCOFTAC Special Interest Group 33 Conference, September 1998, Gottingen, Germany.

Yang, Zhiyin, Voke, P R and Savill, A M (1994) Bypass Transition Under Turbulence: From Simulation to Modelling. In: the 5th European Turbulence Conference, July 1994, Sienna.

Conference Proceedings

Ascanio, G M and Wang, W J (2007) Diesel engine turbocharger performance monitoring using vibration analysis. The 8th International Conference on Engines for Automobile, Capri, Italy, 16-20 Sept 2007. Published in: Proceeding of the 8th International Conference on Engines for Automobile, ICE 2007.

Chowdhury, J I, Soulatiantork, P and Nguyen, B K (2017) Simulation of waste heat recovery system with fuzzy based evaporator model. The 2017 Asian Control Conference - ASCC 2017, Gold Coast, Australia, 17-20 December 2017. Published in: 2017 11th Asian Control Conference (ASCC). 2143-2147. ISBN 9781509015733

Nguyen, Bao Kha and Ahn, Kyoung Kwan (2006) Position control of shape memory alloy actuators by using self tuning fuzzy PID controller. Published in: Proceedings of the 1st IEEE Conference on Industrial Electronics and Applications; Singapore, Republic of Singapore; 24-26 May 2006. Institute of Electrical and Electronics Engineers ISBN 0780395131

Nguyen, Bao Kha, Boyle, Jordan H, Dehghani–Sanij, Abbas A and Cohen, Netta (2010) A C. elegans-inspired micro-robot with polymeric actuators and online vision. IEEE International Conference on Robotics and Biomimetics, 2006. ROBIO '06, Guilin, China, 19-23 December 2009. Published in: IEEE International Conference on Robotics and Biomimetics. IEEE

Nguyen, Bao Kha, Nguyen, Trong Tai and Ahn, Kyoung Kwan (2009) Model predictive control for shape memory alloy cylinder. Published in: Proceedings of the ICCAS-SICE International Joint Conference on Instrumentation, Control and Information Technology; Fukuoka, Japan; 18-21 August 2009. 3766-3770. Institute of Electrical and Electronics Engineers ISBN 9784907764340

Petrov, E P (2015) Analysis of bifurcations in multiharmonic analysis of nonlinear forced vibrations of gas-turbine engine structures with friction and gaps. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, Canada, 15-19 June, 2015. Published in: ASME. Turbo Expo: Power for Land, Sea, and Air, Volume 7B: Structures and Dynamics. 7B V07BT33A006. American Society of Mechanical Engineers ISBN 9780791856772

Petrov, E P (2017) Frequency-domain sensitivity analysis of stability of nonlinear vibrations for high-fidelity models of jointed structures. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, USA, 26-30 June 2017. Published in: Journal of Engineering for Gas Turbines and Power. American Society of Mechanical Engineers ISSN 0742-4795 ISBN 9780791850930

Wang, W J (2016) Dynamics and energy conversion of aircraft landing gears at touchdown. 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016), Chongqing, China, 15-17 June 2016. Published in: MATEC Web of Conferences. 77 (01038) EDP Sciences ISSN 2261-236X

Wang, Weiji (2017) Wheel dynamic response to rolling excitation on road. Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017), Beijing, China, 14-16 April 2017. Published in: Wang, Weiji, (ed.) Advances in Engineering Research. 102 208-213. Atlantis Press ISSN 2352-5401 ISBN 9789462523708

Book

Tian, Liang and Wang, Weiji (2013) Nonlinear dynamics of rotor bearing systems in automotive turbochargers. LAP Lambert Academic Publishing, Germany. ISBN 9783659332913

Tian, Liang and Wang, Weiji (2013) Nonlinear dynamics of rotor bearing systems in automotive turbochargers. LAP Lambert Academic Publishing. ISBN 9783659332913

Wang, Weiji and Aldair, A Aldair (2012) Smart controllers for full vehicle nonlinear active suspension systems. Lambert Academic Publishing. ISBN 9783659248306

Thesis

Bermudez Contreras, Edgar Josue (2010) Modelling active bio-inspired object recognition in autonomous mobile agents. Doctoral thesis (DPhil), University of Sussex.

Bigge, William Tudor (2010) The programmable spring: towards physical emulators of mechanical systems. Doctoral thesis (DPhil), University of Sussex.

Jablonka, Karolina (2015) Study of film thickness in elastohydrodynamic contacts by electrical capacitance. Doctoral thesis (PhD), University of Sussex.

Melentis, Ioannis John (2011) Integrated vetronics systems: mixed integrity vetronics verification and validation. Doctoral thesis (DPhil), University of Sussex.

Mousas, Christos (2015) Data-driven techniques for animating virtual characters. Doctoral thesis (PhD), University of Sussex.

Nagata, Yuichiro (2011) EHD phenomena in grease lubricated contacts. Doctoral thesis (DPhil), University of Sussex.

Teaching Resource

Chatwin, Chris (2017) Design & manufacture of gas turbines for aircraft. [Teaching Resource]