Items where Subject is "TJ0212 Control engineering systems. Automatic machinery (General)"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Authors | Item Type
Number of items at this level: 55.

Article

Aldair, A A and Wang, W J (2011) Design an intelligent controller for full vehicle nonlinear active suspension systems. International Journal on Smart Sensing and Intelligent Systems, 4 (2). pp. 224-243. ISSN 11785608

Aldair, Ammar A and Wang, Weiji (2010) FPGA based adaptive Neuro Fuzzy Inference controller for full vehicle nonlinear active suspension systems. International Journal of Artificial Intelligence and Applications, 1 (4). pp. 1-15. ISSN 0976-2191

Chaudhuri, Balarko, Pal, Bikash C, Zolotas, Argyrios C, Jaimoukha, Imad M and Green, Tim C (2003) Mixed-sensitivity approach to H infin; control of power system oscillations employing multiple FACTS devices. IEEE Transactions on Power Systems, 18 (3). 1149 - 1156. ISSN 0885-8950

Cheng, Li, Dimitriou, Pavlos, Wang, William, Peng, Jun and Aitouche, Abdel (2018) A novel fuzzy logic variable geometry turbocharger and exhaust gas recirculation control scheme for optimizing the performance and emissions of a diesel engine. International Journal of Engine Research. ISSN 1468-0874

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2017) Dynamic model of supercritical Organic Rankine Cycle waste heat recovery system for internal combustion engine. International Journal of Automotive Technology and Management, 18 (4). pp. 589-601. ISSN 1470-9511

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2017) Investigation of waste heat recovery system at supercritical conditions with vehicle drive cycles. Journal of Mechanical Science and Technology, 31 (2). pp. 932-936. ISSN 1738-494X

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2015) Modelling of evaporator in Waste Heat Recovery system using finite volume method and fuzzy technique. Energies, 8 (12). pp. 14078-14097. ISSN 1996-1073

Dizqah, Arash M, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2015) Standalone DC microgrids as complementarity dynamical systems: modeling and applications. Control Engineering Practice, 35. pp. 102-112. ISSN 0967-0661

Dizqah, Arash Moradinegade, Lenzo, Basilio, Sorniotti, Aldo, Gruber, Patrick, Fallah, Saber and De Smet, Jasper (2016) A fast and parametric torque distribution strategy for four-wheel-drive energy-efficient electric vehicles. IEEE Transactions on Industrial Electronics, 63 (7). pp. 4367-4376. ISSN 0278-0046

Du, X, Dixon, R, Goodall, R M and Zolotas, A C (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158

Dunne, Julian (2000) An Explicit Control Energy Function for Optimal Suppression in Linear Systems. Automatica, 36 (1). pp. 153-160. ISSN 0005-1098

Eze, Ethelbert Chinedu and Chatwin, Chris R (2019) Enhanced recurrent neural network for short-term wind farm power output prediction. IJRDO - Journal of Applied Science, 5 (2). pp. 28-35. ISSN 2455-6653

Fussey, Peter and Limebeer, David (2014) Control and constraint of NOx emissions during transient manœuvres, based on an engine combustion model. SAE International Journal of Engines, 7 (2). pp. 956-967. ISSN 1946-3944

Fussey, Peter and Limebeer, David (2016) Model predictive combustion control implementation using parallel computation on an FPGA. SAE International Journal of Engines, 9 (2). pp. 1163-1169. ISSN 19463936

Jafari, S, Dunne, J, Langari, M, Yang, Z, Pirault, J, Long, C and Thalackottore Jose, J (2018) Control of spray evaporative cooling in automotive IC engines. Journal of Thermal Science and Engineering Applications, 10 (4). pp. 1-11. ISSN 1948-5085

Jafari, Soheil, Dunne, Julian F, Langari, Mostafa, Yang, Zhiyin, Pirault, Jean-Pierre, Long, Chris A and Thalackottore Jose, Jisjoe (2017) A review of evaporative cooling system concepts for engine thermal management in motor vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231 (8). pp. 1126-46. ISSN 0954-4070

Jiang, Zheng, Matamoros-Sanchez, Alejandra Z, Zolotas, Argyrios, Goodall, Roger and Smith, Malcolm (2015) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (3). pp. 315-329. ISSN 0954-4097

Kigezi, Tom Nsabwa and Dunne, Julian (2017) A model-based control design approach for linear free-piston engines. Journal of Dynamic Systems, Measurement and Control, 139 (11). ISSN 0022-0434

Lenzo, B, De Filippis, G, DIzqah, A M, Sorniotti, A, Gruber, P, Fallah, S and De Nijs, W (2017) Torque distribution strategies for energy-efficient electric vehicles with multiple drivetrains. Journal of Dynamic Systems, Measurement and Control, 139 (12). ISSN 0022-0434

Liu, Xueqin, Li, Kang, McAfee, Marion, Nguyen, Bao Kha and McNally, Gerald (2012) Dynamic gray-box modeling for on-line monitoring of polymer extrusion viscosity. Polymer Engineering and Science, 52 (6). pp. 1332-1341. ISSN 0032-3888

Michail, K, Zolotas, A C, Goodall, R M and Whidborne, J F (2012) Optimised configuration of sensors for fault tolerant control of an electro-magnetic suspension system. International Journal of Systems Science, 43 (10). pp. 1785-1804. ISSN 0020-7721

Michail, Konstantinos, Zolotas, Argyrios C and Goodall, Roger M (2013) Fallback options for airgap sensor fault of an electromagnetic suspension system. Central European Journal of Engineering, 3 (2). pp. 206-220. ISSN 1896-1541

Michail, Konstantinos, Zolotas, Argyrios C and Goodall, Roger M (2014) Optimised sensor selection for control and fault tolerance of electromagnetic suspension systems: a robust loop shaping approach. ISA Transactions, 53 (1). 97- 109. ISSN 0019-0578

Nguyen, Bao Kha, McNally, Gerald and Clarke, Alan (2014) Automatic extruder for processing recycled polymers with ultrasound and temperature control system. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 230 (5). pp. 355-370. ISSN 0954-4089

Nguyen, Bao Kha, McNally, Gerald and Clarke, Alan (2014) Real time measurement and control of viscosity for extrusion processes using recycled materials. Polymer Degradation and Stability, 102. pp. 212-221. ISSN 0141-3910

Orukpe, Patience E, Zheng, Xiang, Jaimoukha, I M, Zolotas, A C and Goodall, R M (2008) Model predictive control based on mixed ℋ2/ℋ∞control approach for active vibration control of railway vehicles. Vehicle System Dynamics, 46 (Sup 1). pp. 151-160. ISSN 0042-3114

Pei, Yong-Chen, Chatwin, Chris, He, Ling and Li, Wen-Zuo (2017) A thermal boundary control method for a flexible thin disk rotating over critical and supercritical speeds. Meccanica, 52 (1). pp. 383-401. ISSN 0025-6455

Shim, Yoonsik and Husbands, Phil (2012) Chaotic exploration and learning of locomotion behaviours. Neural Computation, 24 (8). pp. 2185-2222. ISSN 0899-7667

Yang, Jun, Zolotas, Argyrios, Chen, Wen-Hua, Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). pp. 389-396. ISSN 0019-0578

Zamzuri, Hairi, Zolotas, Argyrios, Goodall, Roger and Mazlan, Saiful Amri (2012) Advances in tilt control design of high-speed railway vehicles: a study on fuzzy control methods. International Journal of Innovative Computing, Information and Control, 8 (9). pp. 6067-6080. ISSN 1349-4198

Zamzuri, Hairi, Zolotas, Argyrios C and Goodall, Roger M (2008) Tilt control design for high-speed trains: a study on multi-objective tuning approaches. Vehicle System Dynamics, 46 (Sup 1). pp. 535-547. ISSN 0042-3114

Zhou, Ronghui, Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158

Zhou, Ronghui, Zolotas, Argyrios and Goodall, Roger (2014) Robust system state estimation for active suspension control in high-speed tilting trains. Vehicle System Dynamics, 52 (Supp 1). pp. 355-369. ISSN 0042-3114

Zolotas, Argyrios C, Chaudhuri, Balarko, Jaimoukha, Imad M and Korba, Petr (2007) A study on LQG/LTR control for damping inter-area oscillations in power systems. IEEE Transactions on Control Systems Technology, 15 (1). 151 -160. ISSN 1063-6536

Zolotas, Argyrios C, Wang, Jun and Goodall, Roger M (2008) Reduced-order robust tilt control design for high-speed railway vehicles. Vehicle System Dynamics, 46 (Sup 1). pp. 995-1011. ISSN 0042-3114

Reports and working papers

Dahlstrom, Eric, Pons Lorente, Arnau, Musilova, Michaela, Entrena Utrilla, Carlos, Soni, Anushree, Gásquez García, Oriol, Aliaj, Bora, Sisaid, Idriss, Hussein, Alaa, Naor, Roy and Stratton, Parker (2015) NASA’s in-situ materials challenge: team ISU final report. Technical Report. National Aeronautics and Space Administration (NASA).

Manuel Entrena Utrilla, Carlos, Soni, Anushree, Punch, Orla, Oliveira, Marta, Aliaj, Bora, Gasquez Garcia, Oriol, Musilova, Michaela and Hussein, Alaa (2015) The European Space Agency (ESA) moon challenge: Pandeia team technical report. Technical Report. European Space Agency (ESA), Noordwijk, The Netherlands.

Conference or Workshop Item

Alwi, H, Zolotas, A, Edwards, C and Grigoriadis, K (2012) Sliding mode control design of an electrostatic microactuator using LPV schemes. In: American Control Conference (ACC), 2012, June, Montreal, Canada.

Chatwin, Chris, Young, Rupert, Budgett, David and Birch, Philip (2001) Micro-fabrication employing UV microstereolithography. In: Materials Opportunities on Layered Manufacturing Technology 2 – (MOLMT-2), June 3rd – 6th, 2001, UMIST, Weston Conference Centre, UMIST, Manchester, UK.

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2016) Fuzzy based evaporator model in waste heat recovery system. In: The 3rd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT16), 2 - 3 May 2016, Ottawa, Canada.

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2016) Transient model of dual loop waste heat recovery system. In: 3rd Engine Organic Rankine Cycle Consortium Workshop, 14-16 September 2016, Belfast, UK.

Clarke, Alan and Nguyen, Bao Kha (2012) New extrusion processing method for post-consumer recycled polymer using intelligent closed loop control technology. In: Conference on Advanced Materials, Polymer Processing and Manufacturing, 25 September 2012, Belfast, UK.

Matamoros-Sanchez, A Z, Goodall, R M, Zolotas, A C, Jiang, J Z and Smith, M C (2012) Stability control of a railway vehicle using absolute stiffness and inerters. In: 2012 UKACC International Conference on Control (CONTROL), 3-5 Sept. 2012, Cardiff.

Michail, Konstantinos, Deliparaschos, Kyriakos M, Tzafestas, Spyros G and Zolotas, Argyrios C (2013) AI-based low computational power actuator/sensor fault detection applied on a MAGLEV suspension. In: Control Automation (MED), 2013 21st Mediterranean Conference on, 25-28 June 2013, Platanias, Chania - Crete, Greece.

Michail, Konstantinos, Zolotas, Argyrios and Goodall, Roger (2013) Optimised sensor selection for control and fault tolerance: comparison and some new results. In: Control Automation (MED), 2013 21st Mediterranean Conference on, 25-28 June 2013, Platanias, Chania - Crete, Greece.

Nguyen, Bao Kha (2016) Control of polymer extrusion process with ultrasound. In: International Conference on Mechatronics Engineering and Automation, 07/04/2016 - 09/04/2016, Dubai, United Arab Emirates.

Zhou, Yimin and Zolotas, A (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 2010, Italy.

Conference Proceedings

Chowdhury, Jahedul Islam, Nguyen, Bao Kha, Thornhill, David, Douglas, Roy and Glover, Stephen (2015) Modelling of organic rankine cycle for waste heat recovery process in supercritical condition. International Conference on Mechanical, Materials and Mechatronics Engineering, Madrid, Spain, 26-27 March 2014. Published in: International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering. 9 (3) 477-482. World Academy of Science, Engineering and Technology

Clarke, Alan, Nguyen, Bao Kha and McNally, Gerald (2015) Viscosity control for extrusion process using recycled polymers. Published in: Proceedings of the Second International Conference on Advances in Mechanical and Automation Engineering; Rome, Italy; 18-19 April 2015. 45-49. Institute of Research Engineers and Doctors ISBN 9781632480453

Pease, Gareth, Limebeer, David and Fussey, Peter (2017) Diesel engine optimisation, with emissions constraints, on a prescribed driving route. IEEE AFRICON 2017, Cape Town, 18-20 September 2017. Published in: Cornish, Darryn R, (ed.) 2017 IEEE AFRICON. Institute of Electrical and Electronics Engineers ISSN 2153-0033 ISBN 9781538627754

Saner, Can Berk and Skarvelis-Kazakos, Spyros (2018) Fuel savings in remote Antarctic microgrids through energy management. 53rd International Universities Power Engineering Conference, Glasgow, UK, 4th-7th September 2018. Published in: 2018 53nd International Universities Power Engineering Conference (UPEC). 1-6. Institute of Electrical and Electronics Engineers ISBN 9781538629116

Skarvelis-Kazakos, Spyros (2018) Automating virtual power plant decision making with fuzzy logic and human psychology. 53rd International Universities Power Engineering Conference, Glasgow, UK, 4th-7th September 2018. Published in: 2018 53nd International Universities Power Engineering Conference (UPEC). Institute of Electrical and Electronics Engineers ISBN 9781538629109

Thesis

Al-Mayyahi, Auday Basheer Essa (2018) Motion control of unmanned ground vehicle using artificial intelligence. Doctoral thesis (PhD), University of Sussex.

Thorniley, James (2015) Information transfer and causality in the sensorimotor loop. Doctoral thesis (PhD), University of Sussex.

Zolotas, Argyrios (2002) Advanced control strategies for tilting trains. Doctoral thesis (PhD), Loughborough University.

This list was generated on Tue Jun 6 20:50:05 2023 BST.