A

Al-Qubeissi, Mansour (2012) Treating Non-Matching and Overlapping Meshes at The Interface of Conjugate Heat Transfer. In: ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), November 9-15, 2012, Houston, Texas, USA.

Aslanidou, Ioanna, Rosic, Budimir, Kanjirakkad, Vasudevan and Uchida, Sumiu (2012) Leading edge shielding concept in gas turbines with can combustors. In: ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Volume 4: Heat Transfer, Parts A and B, Copenhagen, Denmark, June 11–15, 2012. American Society of Mechanical Engineers (ASME), pp. 1397-1407. ISBN 9780791844700

Aslanidou, Ioanna, Rosic, Budimir, Kanjirakkad, Vasudevan and Uchida, Sumiu (2013) Leading edge shielding concept in gas turbines with can combustors. Journal of Turbomachinery, 135 (2). 021019-021027. ISSN 0889-504X

Atkins, Nicholas R and Kanjirakkad, Vasudevan (2014) Flow in a rotating cavity with axial throughflow at engine representative conditions. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Dusseldorf, Germany, June 16-20, 2014. Published in: 2014 Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition: Volume 5C: Heat Transfer. American Society of Mechanical Engineers ISBN 9780791845738

C

Chatwin, Chris (2017) Design & manufacture of gas turbines for aircraft. [Teaching Resource]

D

Dixon, J A, Valencia, A G, Coren, D, Eastwood, D and Long, C A (2012) Main annulus gas path interactions – turbine stator well heat transfer. In: Proceedings of the ASME Turbo Expo 2012. American Society of Mechanical Engineers, New York, NY, p. 68588. ISBN 9780791844670

E

Eastwood, D, Childs, P R N, Scanlon, T J, Guijarro-Valencia, D D, Coren, D D, Long, C A and Atkins, N R (2012) Experimental investigation of turbine stator well rim seal, reingestion and interstage seal flows using gas concentration techniques and displacement measurements. Journal of Engineering for Gas Turbines and Power, 134 (8). 082501. ISSN 0742-4795

Eastwood, Daniel (2014) Investigation of rim seal exchange and coolant re-ingestion in rotor stator cavities using gas concentration techniques. Doctoral thesis (PhD), University of Sussex.

Ekong, Godwin (2014) Tip clearance control concepts in gas turbine H.P. compressors. Doctoral thesis (PhD), University of Sussex.

Eze, Ethelbert Chinedu and Chatwin, Chris R (2019) Enhanced recurrent neural network for short-term wind farm power output prediction. IJRDO - Journal of Applied Science, 5 (2). pp. 28-35. ISSN 2455-6653

J

Janke, E, Haselbach, F, Whitney, C, Kanjirakkad, V, Thomas, R and Hodson, H (2006) Passive shroud cooling concepts for HP turbines: CFD based design approach. In: ASME Turbo Expo 2006: Power for Land, Sea, and Air, Volume 3: Heat Transfer, Parts A and B, Barcelona, Spain, May 8–11, 2006. American Society of Mechanical Engineers (ASME), pp. 947-956. ISBN 079184238X

Jarallah, Ishaq and Kanjirakkad, Vasudevan P (2016) Improving the fidelity of aerodynamic probes using additive manufacturing. Rapid Prototyping Journal, 22 (1). pp. 200-206. ISSN 1355-2546

K

Kanjirakkad, Vasudevan, Thomas, Richard, Hodson, Howard, Janke, Erik, Haselbach, Frank and Whitney, Chris (2006) Passive shroud cooling concepts for HP turbines: experimental investigations. In: ASME Turbo Expo 2006: Power for Land, Sea, and Air, Volume 3: Heat Transfer, Parts A and B, Barcelona, Spain, May 8–11, 2006. American Society of Mechanical Engineers (ASME), pp. 1065-1074. ISBN 079184238X

Kanjirakkad, Vasudevan, Thomas, Richard, Hodson, Howard, Janke, Erik, Haselbach, Frank and Whitney, Chris (2008) Passive shroud cooling concepts for HP turbines: experimental investigations. Journal of Turbomachinery, 130 (1). 011017. ISSN 0889-504X

L

Lehmann, Knut, Kanjirakkad, Vasudevan and Hodson, Howard (2012) Aerodynamic and aerothermal investigation of the flow around an HPT rotor shroud: PIV measurements. In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, Volume 5: Heat Transfer, Parts A and B, Vancouver, British Columbia, Canada, June 6–10, 2011. American Society of Mechanical Engineers (ASME), New York, pp. 1363-1373. ISBN 9780791854655

Lehmann, Knut, Kanjirakkad, Vasudevan and Hodson, Howard (2011) Aerodynamic and aerothermal investigation of the flow around an HPT rotor shroud: heat transfer and cooling effectiveness. In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, Volume 5: Heat Transfer, Parts A and B, Vancouver, British Columbia, Canada, June 6–10, 2011. ASME Conference Proceedings . American Society of Mechanical Engineers (ASME), New York, pp. 1375-1384. ISBN 9780791854655

Li, Yan-Ling (2014) Numerical simulations of rotating stall in axial flow compressors. Doctoral thesis (PhD), University of Sussex.

Long, Christopher, Miles, Anna Louise and Coren, Daniel (2012) Windage measurements in a rotor stator cavity with rotor mounted protrusions and bolts. Proceedings of ASME Turbo Expo 2012.

Loque, S, Kanjirakkad, V, Aslanidou, I, Lubbock, R, Rosic, B and Uchida, S (2015) A new experimental facility to investigate combustor–turbine interactions in gas turbines with multiple can combustors. Journal of Engineering for Gas Turbines and Power, 137 (5). ISSN 0742-4795

Luque, S, Kanjirakkad, V, Aslanidou, I, Lubbock, R, Rosic, B and Uchida, S (2014) A new experimental facility to investigate combustor-turbine interactions in gas turbines with multiple can combustors. In: ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Volume 2C: Turbomachinery, Düsseldorf, Germany, June 16–20, 2014. American Society of Mechanical Engineers (ASME). ISBN 9780791845622

M

Majidpour, Mehdi (2011) The dynamics of technological catching-up: the case of Iran’s gas turbine industry. Doctoral thesis (DPhil), University of Sussex.

Miles, Anna Louise (2012) An experimental study of windage due to rotating and static bolts in an enclosed rotor-stator system. Doctoral thesis (DPhil), University of Sussex.

N

Nucara, Pascal (2014) Design of gas turbine axial compressors for fuel flexibility. Doctoral thesis (PhD), University of Sussex.

P

Payne, Daniel and Kanjirakkad, Vasudevan (2016) Measurement of tip clearances using capacitive proximity sensors in turbine rotor stator cavities. In: XXIII Biennial Symposium on Measuring Techniques in Turbomachinery, 1 - 2 September 2016, Stuttgart, Germany.

Petrov, E P, Zachariadis, Z- I, Beretta, A and Elliott, R (2013) A study of nonlinear vibrations in a frictionally damped turbine bladed disk with comprehensive modeling of aerodynamic effects. Journal of Engineering for Gas Turbines and Power, 135 (3). 032504. ISSN 0742-4795

Puttock, Mark and Rose, Martin (2016) Measurement of thermal wakes in compressor secondary air systems using low frequency thermocouple data. XXIII Biannual Symposium on Measuring Techniques in Turbomachinery, Stuttgart, Germany, 1-2 September 2016. Published in: Proceedings of XXIII Biannual Symposium on Measuring Techniques in Turbomachinery.

Puttock-Brown, Mark, Rose, Martin and Long, Christopher Experimental and computational investigation of Rayleigh-Bénard flow in the rotating cavities of a core compressor. Turbo Expo 2017: Turbine Technical Conference and Exposition, Charlotte, North Carolina, USA, 26-30 June, 2017. Published in: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers ISBN 9780791850886

Puttock-Brown, Mark Richard (2018) Experimental and numerical investigation of flow structure and heat transfer in gas turbine HP compressor secondary air systems. Doctoral thesis (PhD), University of Sussex.

R

Rogers, R H (1985) Computation of heat transfer in a rotating cavity with a radial outflow of coolant. Part 1: The symmetrically-heated cavity. Technical Report. University of Sussex, Brighton.

T

Tan, Yuanqiu, Zang, Chaoping and Petrov, E P (2019) Analysis of sensitivity and optimization for mistuned bladed disk forced response using high-fidelity models. Mechanical Systems and Signal Processing, 124 (1). pp. 502-523. ISSN 0888-3270

Tian, L, Wang, W J and Peng, Z J (2013) Nonlinear effects of unbalance in the rotor-floating ring bearing system of turbochargers. Mechanical Systems and Signal Processing, 34 (1-2). pp. 298-320. ISSN 0888-3270