A

Ascanio, Gabriella and Wang, William (2008) Turbocharged diesel engine performance monitoring and diagnosis using system identification techniques. In: Bruzzone, L (ed.) Proceedings of the 27th IASTED International Conference on Modelling, Identification, and Control: February 11-13, 2008, Innsbruck, Austria. ACTA Press, Anaheim; Calgary. ISBN 9780889867116

C

Chatwin, Chris, Ngomo, Oscar Ondo, Rodriguez Loya, Salvador, Young, Rupert and Birch, Philip (2015) Future cities. In: IET Communities, 19 May 2015, University of Sussex.

Chowdhury, Jahedul Islam, Nguyen, Bao Kha and Thornhill, David (2016) Transient model of dual loop waste heat recovery system. In: 3rd Engine Organic Rankine Cycle Consortium Workshop, 14-16 September 2016, Belfast, UK.

G

Gabrovsek, Stanislas Pierre (2010) A methodology to enhance Urban Reconnaissance UGV requirements through simulation. Doctoral thesis (DPhil), University of Sussex.

J

Jafari, S, Dunne, J, Langari, M, Yang, Z, Pirault, J, Long, C and Thalackottore Jose, J (2018) Control of spray evaporative cooling in automotive IC engines. Journal of Thermal Science and Engineering Applications, 10 (4). pp. 1-11. ISSN 1948-5085

K

Kawai, Norifumi (2009) Keiretsu corporate networks are innate to the Japanese auto sector, but could this system finally be changing? J@pan Inc, 85. pp. 10-12. ISSN 1345-4846

Koscso, Adam, Dhondt, Guido and Petrov, Yevgen (2018) High-fidelity sensitivity analysis of modal properties of mistuned bladed disks regarding material anisotropy. Journal of Engineering for Gas Turbines And Power, 141 (2). 021036 1-11. ISSN 0742-4795

L

Lawal, Lasisi S and Chatwin, Chris R (2019) A review of global navigation satellite and augmentation systems. IJRDO - Journal Of Electrical And Electronics Engineering, 5 (3). pp. 1-21. ISSN 2456-6055

M

Melentis, Ioannis John (2011) Integrated vetronics systems: mixed integrity vetronics verification and validation. Doctoral thesis (DPhil), University of Sussex.

Miché, Nicolas D D (2009) Flow and heat transfer measurements inside a heated multiple rotating cavity with axial throughflow. Doctoral thesis (DPhil), University of Sussex.

O

Oikonomidis, Panagiotis Ioannis (2011) High availability MilCAN. Doctoral thesis (DPhil), University of Sussex.

P

Pease, Gareth, Limebeer, David and Fussey, Peter (2017) Diesel engine optimisation, with emissions constraints, on a prescribed driving route. IEEE AFRICON 2017, Cape Town, 18-20 September 2017. Published in: Cornish, Darryn R, (ed.) 2017 IEEE AFRICON. Institute of Electrical and Electronics Engineers ISSN 2153-0033 ISBN 9781538627754

Petrov, E P (2018) A method for parametric analysis of stability boundaries for nonlinear periodic vibrations of structures with contact interfaces. Journal of Engineering for Gas Turbines and Power, 141 (3). 031023 1-11. ISSN 0742-4795

R

Rajasekharan Nair, Rahul and Petrov, Yevgen (2018) Analysis of deformation of mistuned bladed disks with friction and random crystal anisotropy orientation using gradient-based polynomial chaos expansion. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition: Volume 7C: Structures and Dynamics.

S

Sharma, Tanay, Chatwin, Chris, Long, Christopher, Young, Rupert and Birch, Philip (2008) Alternative Space Vehicle Launch Systems. In: AIAA SPACE 2008 Conferance & Exposition, 9-11th Sept, 2008, San Diego, California.

Sharma, Tanay, Chatwin, Chris, Young, Rupert and Birch, Philip (2011) A Global Space Policy that would revive Space Exploration. In: Recent Advances in Space Technologies (RAST) 2011, 9-11th June, 2011, Istanbul, Turkey.

Sharma, Tanay, Mitra, Bhargav, Chatwin, Chris, Young, Rupert and Birch, Philip (2009) Advanced MagLev propulsion system and its economic impact. In: 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2-5 August, 2009, Denver, Colorado, United States.

Summers, Daniel F (2011) Verification and validation of complex vetronic systems with FlexRay. Doctoral thesis (DPhil), University of Sussex.

W

Wang, Weiji (2018) Undercarriage heat power in aircraft landing. Aeronautics and Aerospace Open Access Journal, 2 (4). pp. 215-221. ISSN 2576-4500